Hiking Shoes – Hiking Shoe Care


This article will give you some tips on how to care for your hiking shoes, as well as hiking boots, in the best way possible.


Four good habits that you should always follow. Hiking Shoe / Hiking Boot Care.

  1. Use a brush and some water to clean your hiking shoes/boots after every hike.
  2. Permit the whole shoe / boot to dry by removing the inserts after every hike.
  3. Always store your hiking shoes / boots at room temperature.
  4. When it seems like your shoes / boots aren’t water resistant anymore, treat them with a high quality water resistance treatment that you can buy at any hiking related store.


When Hiking Shoes / Boots Are New.

  • Always follow the maker’s maintenance advice and keep the care instructions in a safe place.
  • It is vary rare that new shoes / boots would require a treatment straight out of the box as most manufacturers treat the shoes / boots within the factory already.
  • Always break in your new hiking shoes / boots before going on your hiking trip.

After you have bought a new pair of shoes for hiking / boots for hiking you need to walk them in. Read This Article to learn exactly how you should go about walking in your new shoes for hiking.

  • When you have a single spot on your shoes / boots that is hard to break in, you can apply conditioner to that spot, or specialty products available at shoe repair shores to make it more pliable.


After Any Hike: Clean Those Hiking Shoes / Boots.

Cleaning Tips

Always clean your hiking shoes / boots after a hike, if you come home late or are too tired, then do it the following day, but never leave them dirty.

Why bother?

  • Leaving your shoes / boots dirty will allow particles of dirt, sand and grit to creep into the leather or fabric which will grind away at your shoes / boots like sandpaper.
  • Mud sucks moisture from leather as it dries out, leaving the shoes / boots looking rugged, making them far less pliable and also ages them a whole lot faster.
  • Some shoes / boots have insoles that can be removed and machine washed. Always check if this is possible by looking at the manufacturer instructions, and leave the insoles to dry out completely before putting them back into the shoes/boots.

Tip: Never put your hiking shoes / boots in the washing machine, some inners can be washed, but the boots should never be machine washed.

You can buy a specialized brush for removing dust and dirt from your shoes / boots, but an old vegetable brush, or even a tooth brush, will work just as good. Remove the laces prior to cleaning to get to all the dirty spots and add a little water and boot cleaner, or soap if you have no other options, to scrub your hiking shoes / boots for hiking with.

  • Bar soaps and detergents contain chemicals that attract water and can remove the waterproof coating on your hiking shoes / boots. They can also leave a residue that looks and even smells bad, so stay away from these types of soaps.
  • Use a mixture of 80% water and 20% vinegar to remove mold on your shoes / boots.

Clean the outsoles of your shoes/boots by using a tread cleaner; this will extract any stubborn stones and gunk from the plugs of your shoes / boots. You can also soak the outsoles in water, but only the soles and not the uppers, where mud is really thickly caked on then simply hose away the sludge after they have soaked for a couple of hours. Hiking shoe and hiking boot care is some thing you need to perform to make sure your shoes will last longer than just one trip.


Tips for Drying your Shoes For Hiking / Boots For Hiking.

  • Never rush your shoes / boots’ drying time, this is unhealthy especially for leather boots, rather let them dry at room temperature.
  • Let your insoles air dry separately from the boots after removing them.
  • Never place your shoes / boots near a heat source like an open fire place, campfire or heater. High heat:
  1. Will weaken any adhesive that was used in the making of your shoes / boots.
  2. It can bake the upper if the heat is too high which will cause it to shrink, curl and brittle the leather. This all will cause the shoe to alter its fit.
  • The drying time can be lowered by placing your shoes / boots in front of a fan, in a normal room temperature environment, with the insoles already removed and the tongue lifted up to allow air to flow through the shoes / boots.
  • If you don’t have a fan handy you can stuff some newspaper into each shoes / boot which will then absorb any moisture inside. Change the newspaper every hour until dry.
  • Turn your shoes / boots upside down, this will allow them to dry faster.
  • Never store your shoes / boots in places like attics, garages or any unventilated space where heat can accumulate, rather store them in stable and normal temperature spaces like your closet.